在排除Telnet登录故障时, 哪一步是需要优先做的?
A.检查客户端能否ping通服务器
B.查看登录设备的用户数是否到达了上限
C.查看设备上VTP型用户界面视图下是否配置了ACL
D.查看VTY类型用户界面视图下允许接入的协议配置是否正确
- · 有3位网友选择 A,占比37.5%
- · 有3位网友选择 B,占比37.5%
- · 有1位网友选择 C,占比12.5%
- · 有1位网友选择 D,占比12.5%
A.检查客户端能否ping通服务器
B.查看登录设备的用户数是否到达了上限
C.查看设备上VTP型用户界面视图下是否配置了ACL
D.查看VTY类型用户界面视图下允许接入的协议配置是否正确
A、<huawei>sysname R1
B、[Huawei]sysname R1
C、[Huawei]system R1
D、<huawei>system R1
A、检查主机的ARP缓存表是否溢出
B、检查交换机是否配置了默认网关地址
C、使用Ping来检查主机与路由器G0/0/0接口间的IP连通性
D、检查路由器上关于Telnet的配置是否正确
A、<r1>display current-configurationg
B、<r1>display saved-configuration
C、[R1-GigabitEthernet0/0/0]display
D、[R1]show current-configurationg
A、[R1]ip address 192.168.1.1 255.255.255.0
B、[R1-GigabitEthernet0/0/0]ip address 192.168.1.1 255.255.255.0
C、[R1-GigabitEthernet0/0/0]ip address 192.168.1.1 24
D、[R1-GigabitEthernet0/0/0]ip add 192.168.1.1 24
A、[R1]save
B、<r1>save
C、<r1>copy current startup
D、[R1]copy current startup
A、[R1-ui-console0]authentication-mode password
B、[R1-ui-console0]authentication-mode aaa
C、[R1-ui-console0]authentication-mode Radius
D、[R1-ui-console0]authentication-mode scheme
A、[R1-aaa]local-user han password cipher huawei privilege level 3
B、[R1-aaa]local-user han service-type telnet
C、[R1-aaa]local-user han password cipher huawei huawei
D、[R1-aaa]local-user hanservice-type terminal
为了保护您的账号安全,请在“简答题”公众号进行验证,点击“官网服务”-“账号验证”后输入验证码“”完成验证,验证成功后方可继续查看答案!