题目内容
（请给出正确答案）
A．Transparent
B．Server
C．Auto
D．Client
E．User
简答题官方参考答案
（由简答题聘请的专业题库老师提供的解答）
更多“Which VTP mode should a Cisco switch be set to if this switch is to add or delete VLANs to”相关的问题
A. BPDU
B. Port security
C. RSTP
D. STP
E. VTP
F. Blocking mode
交换机参与了 VTP 域且配置为 VTP 服务器。交换机需要在整个 VTP 域中传播 VLAN 10(由制造部门使用)，但没有使用该特定 VLAN 的任何直连主机。哪种配置将满足此要求？()
A、interface fa0/24 switchport mode access switchport access vlan 10
B、interface g0/1 switchport mode trunk switchport trunk native vlan 10
C、vlan 10 name Manufacturing exit
D、vtp mode server vtp password Manufacturing
A．It allows two VTP servers to exists in the same domain, each configured with different passwords
B．It is the password required when promoting a switch from VTP client mode to VTP server mode
C．It is used to access the VTP server to make changes to the VTP configuration
D．It is used to validate the sources of VTP advertisements sent between switches
E．None of the above
What are two results of entering the VESwitch(config)# vtp mode client command on a Catalyst switch in the Ezonexam LAN？ (Choose two.)
A．The switch will ignore VTP summary advertisements
B．The switch will forward VTP summary advertisements
C．The switch will process VTP summary advertisements
D．The switch will originate VTP summary advertisements
E．The switch will create, modify and delete VLANs for the entire VTP domain
能进入VLAN配置状态的交换机命令是______。
A．2950(Config)# vtp pruning
B．2950# vlan DataBase
C．2950(Config)# vtp server
D．2950(Config)# vtp moDe
阅读以下的配置信息，将(1)～(4)处空缺的内容填写相应的位置。
SW1＞enable //进入特权模式
SW1vlan database //进入vlan配置子模式
SW1(lan)vtp server //设置本交换机为Server模式
SW1(lan)vtp domain(1) //设置域名
SW1(lan)(2) //启动修剪功能
SW1(lan)exit //退出vlan配置模式
SW1(lan)(3) //查看vtp设置信息
VTP version:2
Configuration Revision:0
Maximum VLANs supported locally:64
Number of existing VLANs:1
VTP Operating Mode:Serverl
VTP domain Name:Serverl
VTP pruning Mode:Enable
VTP V2 Mode:Disabled
VTP Traps Generation:Disabled
MD5 digest:0x82 0x6B 0xFB 0x94 0xEF 0x92 0x30
Configuartion last modified by 0.0.0.0 at 7-1-05 00:07:51
SW2vlan database
SW2(vlan)vtp domain NULL
SW2(vlan)(4)
Swtting device to VTP CLIENT mode
SW2(vlan)exit
● 能进入VLAN配置状态的交换机命令是 （61） 。
（61）
A. 2950(config)# vtp pruning
B. 2950# vlan database
C. 2950(config)# vtp server
D. 2950(config)# vtp mode
阅读下面的配置信息，将(1)～(4)处空缺的内容填写在相应位置。
SW1＞enable (进入特权模式)
SW1vlan database (进入VLAN配置子模式)
SW1(vlan)vtp server (设置本交换机为Server模式)
SW1(vlan)vtp domain (1) (设置域名)
SW1(vlan) (2) (启动修剪功能)
SW1(vlan)exit (退出VLAN配置模式)
SW1show (3) (查看VTP设置信息)
VTP Vetsion :2
Configuration Revision :0
Maximum VLANs supported locrlly :64
Number of existing VLANs :1
VTP Operating Mode :Server
VTP Domain Name :Server1
VTP Pruning Mode :Enable
VTP V2 Mode :Disabled
VTP Traps Generation :Disabled
MD5 digest :0x82 0x6B 0xFB 0x94 0x41 0xEF 0x92 0x30
Configuration last modified by 0.0.0.0 at 7-1-05 00:07:51
SW2vlan database
SW2(vlan)vtp domain NULL
SW2(vlan) (4)
Setting device to VTP CLIENT mode.
SW2(vlan)exit
阅读以下配置信息，将(4)空缺处的命令填写完整。
SW2 vlan database
SW2(vlan) vtp domain NULL
SW2(vlan) (4)
Setting device to VTP CLIENT mode
SW2(vlan)exit
Which of the following is NOT one of gestures？
A．Raising the eyebrows.
B．Shrugging the shoulders.
C．Nodding and shaking the head.
D．The way we dress and the colors we wear.
警告：系统检测到您的账号存在安全风险
为了保护您的账号安全，请在“简答题”公众号进行验证，点击“官网服务”-“账号验证”后输入验证码“”完成验证，验证成功后方可继续查看答案！
