Which account is used to access a Junos device in factory-default configuration?()
A.root
B.admin
C.juniper
D.user
- · 有3位网友选择 C,占比37.5%
- · 有3位网友选择 B,占比37.5%
- · 有1位网友选择 D,占比12.5%
- · 有1位网友选择 A,占比12.5%
A.root
B.admin
C.juniper
D.user
A、Wireless network cards
B、wireless bridges
C、wireless antennas
D、HUB
A. The factory-default configuration is running on the device.
B. The Junos OS was corrupted and did not boot correctly.
C. The device was recently upgraded to a newer version of the Junos OS.
D. The device‘s memory has been corrupted and no file system is present after a reboot.
A. It is the address used by default as the local address for broadcast and multicast packets sourced locally and sent out of the interface
B. You use the primary address when you have multiple IP addresses belonging to the same subnet on the same interface
C. It can be useful for selecting the local address used for packets sent out of unnumbered interfaces when multiple non-127 addresses are configured on the loopback interface
D. By default, the primary address on an interface is selected as the numerically highest local address configured on the interface
A. show route forwarding-table
B. show forwarding
C. show configuration
A.redistributedirect
B.redistributestatic
C.redistributeconnected
D.redistributeaccess-internal
A. root authentication
B. default gateway
C. hostname
D. management services
为了保护您的账号安全,请在“简答题”公众号进行验证,点击“官网服务”-“账号验证”后输入验证码“”完成验证,验证成功后方可继续查看答案!