两台交换机相连,要求两个连接端口工作在全双工通信方式下。若端口的通信方式为默认的duplex auto时,有时会出现大量丢包现象。这时,需要重新配置端口的通信方式。其正确的配置语句是______。
A.duplexfull duplexhalf
B.duplexhalf duplexfull
C.duplexhalf duplexhalf
D.duplexfull duplexfull
A.duplex full duplex half
B.duplex half duplex full
C.duplex half duplex half
D.duplex full duplex full
A.duplex full duplex half
B.duplex half duplex full
C.duplex half duplex half
D.duplex full duplex full
A.N18010和N18014,只要2个设备上插的引擎类型相同,且2台设备上都有万兆或40G以上的接口,就可以互相组建VSU
B.两台S8610组建VSU,若设备上配置了BFD检测且有连线,当BFD线路全部down掉,BFD检测就会认为VSU出现双主机
C.S86、S12K系列交换机,任意线卡的万兆口或40G端口都可以指定为VSL成员端口
D.4台S57E设备组建VSU,ARP容量、MAC地址表容量等硬件表象相比单台设备不会增加
A、duplex full duplex half
B、duplex half duplex full
C、duplex half duplex half
D、duplex full duplex full
A.Echo Request
B.Port Unreachable
C.Time Exceeded
D.Echo Reply
A.需要使用peer命令手工指定邻居
B.优先级最高的路由器当选DR
C.端口稳定状态为Point-to-Point
D.使用单播地址发送所有OSPF报文
A.优先级最高的路由器当选DR
B. 需要使用peer命令手工指定邻居
C. 使用单播地址发送所有OSPF报文
D. 端口稳定状态为Point-to-Point
为了保护您的账号安全,请在“简答题”公众号进行验证,点击“官网服务”-“账号验证”后输入验证码“”完成验证,验证成功后方可继续查看答案!