题目内容
（请给出正确答案）
For the cantilever beam with length l, the deflection at the free end is
. If the beam length is reduced to one half of its original length, then the deflection at the free end should be
A、
B、
C、
D、
简答题官方参考答案
（由简答题聘请的专业题库老师提供的解答）
抱歉！暂无答案，正在努力更新中……
更多“for the cantilever beam with length l, the deflection at the free end is”相关的问题
A.
B.
C.
D.
For the cantilever beam with length l, the deflection at the free end is
. If the beam length is reduced to one half of its original length, then the defection at the free end should be
A、
B、
C、
D、
A.
B.
C.
D.
A.12.7 
B.14.2
C.16.1
D.18.5
A.For point 1:
B.For point 2:
C.For point 3:
D.For point 4:
A cantilever beam is loaded as shown in the figure. The bending moment at 0.5 m from the support is approximately:
A、12.7 kN·m
B、14.2 kN·m
C、16.1 kN·m
D、18.5 kN·m
A.For point 1:
B.For point 2:
C.For point 3:
D.For point 4:
A cantilever beam AB of an isosceles trapezoidal cross section has a length L = 0.8 m , dimensions
= 80 mm and
= 90 mm , and height h =110 mm (see figure). The beam is made of brass weighing 85 kN/m 3 . (a) Determine the maximum tensile stress
and maximum compressive stress
due to the beam’s own weight. (b) If the width
is doubled, what happens to the stresses？ (c) If the height h is doubled, what happens to the stresses？
In section B of the cantilever beam shown,
A、there is a jump in the shear force diagram, and the bending moment diagram is continuous and smooth.
B、there is a sudden slope change in the shear force diagram and jump in the bending moment diagram.
C、there is a jump in both the shear force diagram and the bending moment diagram.
D、there is no jump in the shear force diagram, but there is a jump in the bending moment diagram.
警告：系统检测到您的账号存在安全风险
为了保护您的账号安全，请在“简答题”公众号进行验证，点击“官网服务”-“账号验证”后输入验证码“”完成验证，验证成功后方可继续查看答案！
